Body & Interior
You choose interior tools for trim, clips and rubber seals. They prevent damage when removing upholstery and door rubber. Look at the clip shape and the width of the gap. Use wedges for wide gaps and angled pry bars for tight spaces. Check that the tool matches the OEM number of your car. Consider length and grip for safe work.
Claw for Car Body Alignment | 120 mm | one pulling direction | max. 5 t
Trim Strip Wedge | 190 x 29 mm
Claw for Car Body Alignment | 45 mm | one pulling direction | max. 5 t
Wire-through Testing Probe | with T-Handle
Window Strip Lever | 180 x 350 mm
Claw for Car Body Alignment | 35 mm | one pulling direction | max. 3 t
Trim Strip Wedge | Nylon | 185 x 25 mm
Cutting Wire Insertion Tool | for Windscreen removal
Car Body Alignment Claw | 43 mm | two directions of pull | max. 5 t, side 2 t
Parting Awl | 330 mm
Windshield Removal Tool Kit | 14 pcs.
Panel Removal Wedge and Trim Strip Set | various Shapes | 19 pcs.
Car Body Alignment Claw | 43 mm | one pulling direction | max. 5 t
Claw for Car Body Alignment | 90° | 36 mm | one pulling direction | max. 2 t
Windshield Removing Tool Set
Bumping Mallet | 260 mm
Claw for Car Body Alignment | 90° angled | 40 mm | one pulling direction | max. 2 to.
Windshield Removing Tool Set | 10 pcs.
Car Body File Frame
Glass Breaking Pliers | 205 mm
Body File Sheet | coarse | half-round milled | 350 x 35 x 4 mm
Body File Sheet | fine | radially milled | 350 x 35 x 4 mm
Assembly Hook
Body File Sheet | coarse | obliquely milled | 350 x 35 x 4 mm
Body & Interior Tools
Body & interior tools
This category contains the specialist tools for damage repair, interior work and disc replacement. You will find everything for removing panels, pulling dents and fitting discs.
Repairing dents and damage
For repairing dents without respraying, use smart repair (PDR) tools. Dent pulling rods and glue puller kits straighten the dent from inside or outside. For larger damage to bodywork, use car body repair tools. Filling knives and sanding blocks prepare the surface for the repair.
Removing trims and panels
To release trims and interior panels without damage, use special wedges and levers. Plastic wedges are suitable for delicate surfaces. Steel clip removers release fixing clips without breaking them. When replacing a door lock or hinge, you need door and locking system tools. Always choose based on the OEM number.
Discs and wiper arms
To cut out discs, use cutting wire and pull handles. Saw through the adhesive layer while a counterstay tensions the wire. Choose the wire length based on the disc circumference. Replacing wiper arms? Use wiper arm pullers. A universal puller with adjustable clamping depth removes seized arms from the spindle without damage.
Selection guide
For a dent without paint damage, choose smart repair. For panels and trims, use wedges and clip removers. For disc replacement, you need cutting wire and pull handles. For a seized wiper arm, use a puller. This way you always have the right tool for the job.