Body & Interior
You choose interior tools for trim, clips and rubber seals. They prevent damage when removing upholstery and door rubber. Look at the clip shape and the width of the gap. Use wedges for wide gaps and angled pry bars for tight spaces. Check that the tool matches the OEM number of your car. Consider length and grip for safe work.
Door Handle Clip Pliers | 220 mm
Double Rubber Suction | aluminium | Ø 115 mm
Windscreen Wiper Arm Puller | for BMW, VW
Window Lift and Door Handle Clip Removing Tool | 270 mm
Suction Lifter | Metal | Ø 115 mm
Edge Protection and Sealing Rubber Loosener
Windscreen Wiper Arm Puller | for Ford, Mercedes-Benz, Seat
Dent Repair Sliding Hammer Set
Triple Rubber Suction | aluminium | Ø 115 mm
Lead Perlon Cable | 15 m x 3 mm
Windscreen Wiper Arm Puller | for Porsche, VW
Dent Repair Handle
Air Inflating Pillow Set | 5 pcs.
Hand Anvil | wedge shape | curved
Spare Glue Stick for BGS 865, 8057 | 10 pcs.
Suction Lifter Set | 3 pcs.
Windscreen Wiper Arm Puller | universal
Trim Strip Set | various Shapes | 5 pcs.
Tool for Removing glued Car Windows
Door Adjusting Lever
Hand Anvil | ledge shape
Trim Strip Wedge with Hole | 100 x 45 mm
Dent Repair Pads | for BGS 865 | 12 pcs.
Door Trim Removing Tool | 235 mm
3 pack sizes · from €10.31
1-2Body & Interior Tools
Body & interior tools
This category contains the specialist tools for damage repair, interior work and disc replacement. You will find everything for removing panels, pulling dents and fitting discs.
Repairing dents and damage
For repairing dents without respraying, use smart repair (PDR) tools. Dent pulling rods and glue puller kits straighten the dent from inside or outside. For larger damage to bodywork, use car body repair tools. Filling knives and sanding blocks prepare the surface for the repair.
Removing trims and panels
To release trims and interior panels without damage, use special wedges and levers. Plastic wedges are suitable for delicate surfaces. Steel clip removers release fixing clips without breaking them. When replacing a door lock or hinge, you need door and locking system tools. Always choose based on the OEM number.
Discs and wiper arms
To cut out discs, use cutting wire and pull handles. Saw through the adhesive layer while a counterstay tensions the wire. Choose the wire length based on the disc circumference. Replacing wiper arms? Use wiper arm pullers. A universal puller with adjustable clamping depth removes seized arms from the spindle without damage.
Selection guide
For a dent without paint damage, choose smart repair. For panels and trims, use wedges and clip removers. For disc replacement, you need cutting wire and pull handles. For a seized wiper arm, use a puller. This way you always have the right tool for the job.