Hand tools
Hand tools are what a technician holds all day: combination and ring spanners, pliers, screwdrivers, ratchets, hammers and torque wrenches. Our range runs from individual sizes to complete sets, and from general-purpose tools to those built for specific work. Thread cutting, pipe work, bearing removal. The selection is based on what survives in a working shop: through-hardened tool steel, a proper surface finish, and sizing that still fits years later. Every item lists material, across-flats size and drive profile, so you know in advance whether the tool suits the job.
31 subcategories
Sledge Hammer | DIN 1042 | Fibreglass Shaft | Ø 65 mm | 5000 g
End Cutting Pliers | 165 mm
Foil Eraser | Conical | Ø 50 mm
Aluminium / Plastic Hammer | extra long Head | Ø 30 mm | 300 g
Automatic Wire Stripper | for wire Ø 0.13 - 6 mm² | 210 mm
Machinist's Hammer | Hickory Handle | DIN 1041 | 1000 g
Machinist's Hammer | Hickory Handle | DIN 1041 | 1500 g
Machinist's Hammer | Hickory Handle | DIN 1041 | 2000 g
Machinist's Hammer | Hickory Handle | DIN 1041 | 200 g
Machinist's Hammer | Hickory Handle | DIN 1041 | 300 g
Machinist's Hammer | Hickory Handle | DIN 1041 | 400 g
Machinist's Hammer | Hickory Handle | DIN 1041 | 500 g
Machinist's Hammer | Hickory Handle | DIN 1041 | 800 g
Bench Vice Jaw Protectors | Aluminium | 100 mm | 2 pcs.
Bench Vice Jaw Protectors | Aluminium | 125 mm | 2 pcs.
Bench Vice Jaw Protectors | Aluminium | 150 mm | 2 pcs.
Circlip Pliers Set | for small Circlips | 80 mm | 4 pcs.
Body Cutting Chisel Set | 3 pcs.
Pin Drill Set | 6 - 8 - 10 - 13 mm | 4 pcs.
Tap and Die Set | M6 - M24 | 45 pcs.
C-Type Double Ring Spanner, 12-point | 11 x 13 mm
C-Type Double Ring Spanner, 12-point | 14 x 15 mm
C-Type Double Ring Spanner, 12-point | 17 x 19 mm
C-Type Double Ring Spanner, 12-point | 21 x 22 mm
Frequently asked questions about Hand tools
Answers to the most common questions from our customers
Chrome-vanadium (CV) is harder and holds its dimensions well; it is the standard material for hand tools. Chrome-molybdenum (CrMo) is tougher and deforms rather than breaking, so it copes with shock loads. Impact tools are therefore always CrMo, recognisable by the black phosphated finish instead of chrome.
No. A chrome-plated hand socket is hardened for hand force and can shatter under the shock load of an impact wrench, sending fragments flying. Use only sockets rated as impact sockets. Those are made of tougher CrMo steel with thicker walls.
As soon as you work on the high-voltage system of a hybrid or electric vehicle. VDE tools are insulated and individually tested at 10,000 V, with a working voltage up to 1,000 V. Ordinary tools with a plastic handle do not offer that protection, even though they look similar.
They are standards fixing dimensions, shape and minimum strength. DIN 3113 covers combination and ring spanners, DIN 5264 screwdrivers and ISO 6789 torque wrenches. Tools that comply fit standardised fasteners precisely, which saves you rounded bolt heads.
ISO 6789 sets 5,000 uses or one year, whichever comes first. Always store the wrench released at its lowest setting: if the spring stays under tension the calibration drifts and the applied torque is no longer accurate.
Hand Tools for the Workshop
Hand tools for every job
Here you will find the tools you use daily: wrenches, pliers, screwdrivers, hammers and more. The category is divided into 33 subcategories, so you can quickly find the right tool.
You can buy individual sizes or complete sets. This way you only replace what is broken. Each article shows material, across flats and connection size.
Wrenches and sockets
For loosening and tightening bolts and nuts you need combination wrenches and ratchet wrenches. Choose the right across flats size. For hard-to-reach places use hex and Torx keys or hook and pin wrenches.
With sockets and ratchets and extension pieces you can build a complete set for any job.
Pliers and screwdrivers
Pliers come in many versions: combination pliers, stripping pliers, water pump pliers. Choose the pliers that suit the job. Screwdrivers are available with different profiles and sizes.
For cutting sheet metal and cables use knives and shears. Choose shears suitable for the material.
Striking and cutting tools
Hammers and axes and splitting hammers are chosen by head weight and handle. Chisels are used for chiselling off weld spots. Pin punches and centre punches are indispensable for driving out pins and marking drill holes.
For cutting threads you need threading tools. These make internal and external threads.
Drilling, milling and grinding
Drills are chosen based on the material. HSS twist drills are suitable for wood and steel. Milling cutters are used for finishing holes and edges.
With grinding and polishing discs you can finish surfaces. Brushes remove rust and old paint.
Clamping and fixing
Vices clamp your workpiece securely. Glue clamps and screw clamps are handy for gluing and fixing parts.
Files, scrapers and filling knives
Files are used for shaping metal and wood. Scrapers remove gaskets and old adhesive residue. Filling knives and spatulas apply filler and body filler smoothly.
Saws and pipe processing
Saws and saw blades are available for metal and wood. Pipe cutters and deburring tools process pipes to size.
Measuring and marking
Measuring tools such as callipers and tape measures are essential. Letter and number punches permanently mark workpieces.
Storage and transport
Tool cases and bags keep your tools organised. For specific brands there are replacement cases and bags available.
Specialist tools
For sanitary work you need basin wrenches and radiator keys. Stud extractors remove broken studs. Power drill accessories turn your drill into a versatile tool.
Selection guide
For general workshop work start with a set of wrenches, pliers and screwdrivers. For bodywork you need chisels, hammers and scrapers.
For maintenance on machines and vehicles choose sockets and ratchets. This way you always have the right tool at hand.